| Home | Imprint / Disclaimer | Contact | Global Sites |
Technical changes and errors excepted. Minor color variations are subject to typography.

Do you have any questions about KaVo Everest? Then you have come to the right place! Hotline Service: Fon: +49 7351 / 56-2100 Fax: +49 7351 / 56-2466 service.everest@kavo.com   Hotline User Service: Fon: +49 7351 / 56-2200 Fax: +49 7351 / 56-2466 awt.everest@kavo.com   Postal Adress: KaVo Dental GmbH Re: Everest Bismarckring 39 D - 88400 Biberach We never leave you without assistance: KaVo Everest remote service Wherever in the world you work with the KaVo Everest and whatever problems you may have, our hotline team will assist you directly and quickly via Internet. We can therefore analyse and handle any problems together with you directly on the PC. Please click on this link to start the Remote Software (exe, 200 kb). Highest Quality Highly precise and automated processing with Everest Engine. Perfect sintering with Everest Therm. To make it possible to guarantee this perfection and precision of the CAD/CAM components for you, each system is developed with extreme care and stringent quality control is implemented.   Continuous improvement is of primary importance to us. All Everest system modules are continuously being updated and improved by the innovations team. If you would like and individual cost-effectiveness calculation for your laboratory or have questions about financing or leasing the KaVo Everest System, please call us or send us an online form (Tel. +49 7351 56 1843). The responsible sales representative will then contact you. Servicing and care of KaVo Everest systems We repeatedly receive questions about the required servicing and care of KaVo Everest systems. Below is a summary of the most important tasks. Daily Each time before you use the unit, make sure that the gripping yoke inserts and workpiece spaces on the gripping yokes are clean and coated in a thin film of oil. Empty the chips drawer and clean it. Check the fill level of the cooling lubricant at the cooling lubricant unit. The coolant lubricant level must be between the minimum and maximum marks. Everest - Made in Germany: Our goal is Dental Excellence KaVo Everest - the name is a program for a system that sets standards. It started with the vision of perfection in laboratory technology at the highest innovation level. This was the vision that guided a team of specialists formed to meet the challenge. The KaVo Everest team spirit has lasted and offers you a system that will meet your highest expectations. Our mutual success is our vision — with dental excellence by KaVo. This is what the Everest team stands for. With this concept in mind, a specialist team came together in our factory in Leutkirch in the Allgäu and accepted the challenge. When the basis is right, any peak can be scaled. The trendsetting Everest system was developed in Leutkirch and will be manufactured completely in Germany. KaVo Germany is connected over the telephone line to all installed Everest systems anywhere in the world. Our engineers can log in to any Everest system anywhere in the world over this network as required. This saves you time and money, because problems can be resolved as quickly as possible. A service that helps you to maintain the productivity of your laboratory at the highest possible level. According to a customer survey, KaVo Everest remote service has been able to resolve problems successfully in 90% of all cases. Retrieve the MAC address The MAC address is required for an Everest software order (pdf, 137 kb). Weekly Vacuum the interior of the milling/grinding unit at least once per week (more frequently if used often) or clean it with the brush The interior of the milling/grinding unit should be automatically cleaned at least once per week Wipe the exterior housing and window with a dry, lint-free cloth, or remove impurities with a moist cloth and clear water or soapy water  Check the nitrate level, water hardness, pH and concentration of the cooling lubricate, and change if necessary (for instructions, see also the combination and base test) Quarterly Double spindle: Replace the setscrews Mat. no. 0.249.6602 for fastening the milling and grinding tools. Gripping yokes Gripping yokes: Replace setscrews Mat. No. 1.001.5891 for affixing the insert Cooling lubricant unit: Change the aerosol exhaust filter Mat. No. 1002.0534. Cooling lubricant unit: Check the level of the wet filter bag Mat. No. 1.002.8352 and replace if necessary. You can independently perform the above service tasks. In addition, a KaVo-trained service technician should perform servicing once a year. You can independently perform the above service tasks. In addition, a KaVo-trained service technician should perform servicing once a year. For further questions please do not hesitate to contact us Hotline Service: Fon: +49 7351 / 56-2100 Fax: +49 7351 / 56-2466 service.everest@kavo.com Hotline User Service: Fon: +49 7351 / 56-2200 Fax: +49 7351 / 56-2466 awt.everest@kavo.com